International Marketing of Defense & Security Products
MAGAZINES AND WEAPON ACCESSORIES
Others
MOE® Trigger Guard, Polymer – AR15/M4
The MOE (Magpul Original Equipment) Trigger Guard is an enhanced polymer drop in replacement for the AR15 / M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms, but some custom fitting may be required.
All mounting hardware included.
Made in the U.S.A.
Others
Enhanced Trigger Guard, Aluminum – AR15/M4
The Enhanced Trigger Guard is a black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The Enhanced Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard.
All mounting hardware included.
Made in the U.S.A.
Others
Magpul® Enhanced AR Magazine Release
The Magpul AR Enhanced Magazine Release provides an enlarged contact surface for quick and fumble-free magazine changes.
With easy bolt-on installation and no gunsmithing required, the Enhanced AR Magazine Release is made of Mil-Spec hard anodized aluminum to provide durability and light weight.
Made in the USA.
Others
Magpul® Bipod for 1913 Picatinny Rail
The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations.
In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just over 11 oz.
Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. It also has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.
A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.
The Magpul Bipod is available in BLK or FDE colors.
Others
Magpul® Bipod for M-LOK
The Magpul Bipod for M-LOK offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations.
In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just over 11 oz.
Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. It also has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.
A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.
The Magpul Bipod is available in BLK or FDE colors.
Others
Magpul® Suppressor Cover - 5.5"
The Magpul Suppressor Cover - 5.5” is the first product of its kind able to stand up to the extreme temperatures caused by extended strings of semiautomatic and automatic fire and protect the user and equipment against burns, while also speeding up the cooling process. Constructed of a heat-resistant polymer sleeve overlaid onto a raised stainless steel heat shield that mounts directly to the suppressor body with steel clamps, the Magpul Suppressor Cover - 5.5” minimizes heat transfer to keep external cover temperatures up to 1000 degrees F cooler than the surface of the suppressor and allows cooling airflow across the can.
Additionally, it serves as an enhanced thermal insulator and signature reduction device, significantly mitigating mirage distortions to the shooter’s sight picture, reducing the likelihood of impact damage to the suppressor body, and lessening the chance of accidental heat-related injury or damage to personnel or equipment during weapon firing and cool down.
Optimized for 1.5” outer diameter round suppressors with a body length of approximately 5.5” (not including attachment hardware / interface) such as the Surefire SOCOM556-RC2.
Made in the USA.
Others
Magpul® GL Enhanced Magazine Well for GLOCK® 19 GEN 3
The Magpul GL Enhanced Magazine Well for GLOCK 19 GEN 3 is a high performance, purpose-built Glock frame magazine well. It was designed to enhance and ensure positive magazine insertion in high stress scenarios. Its sleek and ergonomic design features also provide excellent concealment and ensure minimal printing to the user's clothing. Ramp and edge geometry allow for the smooth removal of faulty or stuck magazines during reloading or immediate action events.
The Magpul GL Enhanced Magazine Well is optimized for use with standard capacity Glock factory magazines, Magpul GL magazines, and a variety of aftermarket floorplates and extensions that are available for both. Recent generations of reduced capacity (10 rd) factory Glock magazines have several dimensional differences which may interfere with any magazine well, including the Magpul GL Enhanced Magazine Well. Some large aftermarket floorplates may also interfere.
Due to inherent variances in Glock frame production, if an excessively tight fit is experienced during the installation of an Enhanced Magazine Well that requires excessive force it is recommended that a professional gunsmith complete the installation to mitigate the potential for frame damage.
Made in the USA.
Others
Magpul® GL Enhanced Magazine Well for GLOCK® 19 GEN 4
The Magpul GL Enhanced Magazine Well for GLOCK 19 GEN 4 is a high performance, purpose-built Glock frame magazine well. It was designed to enhance and ensure positive magazine insertion in high stress scenarios. Its sleek and ergonomic design features also provide excellent concealment and ensureg minimal printing to the user's clothing. Ramp and edge geometry allow for the smooth removal of faulty or stuck magazines during reloading or immediate action events.
The Magpul GL Enhanced Magazine Well is optimized for use with standard capacity Glock factory magazines, Magpul GL magazines, and a variety of aftermarket floorplates and extensions that are available for both. Recent generations of reduced capacity (10 rd) factory Glock magazines have several dimensional differences which may interfere with any magazine well, including the Magpul GL Enhanced Magazine Well. Some large aftermarket floorplates may also interfere.
The Magpul GL Enhanced Magazine Well for Glock 17 Gen 4 and Glock 19 Gen 4 are not compatible as delivered out of the box with optional factory Glock Modular Back Straps. While end user modification is minor and may be attempted, it is taken at the user's risk.
Due to inherent variances in Glock frame production, if an excessively tight fit is experienced during the installation of an Enhanced Magazine Well that requires excessive force it is recommended that a professional gunsmith be utilized to complete the installation to mitigate the potential for frame damage.
Made in the USA.
Quick Links
North East Technologies (NET) Ltd.
Gamla House, Building A, Ra'anana, 4350108 Israel
Tel. 972-9-748-9038 Fax: 09-7489-066